22nd European Conference on Fracture - ECF22 LOADING AND ENVIRONMENT EFFECTS ON STRUCTURAL INTEGRITY
Belgrade, Serbia
26–31. August 2018
Abstracts submission: 31.01.2018
http://www.ecf22.rs/

 

ECF22 - ESIS Support for 
Researchers Announcement
ESIS AWARDS
CALL FOR PROPOSALS
ESIS - ELSEVIER
YOUNG SCIENTIST AWARD
AWARD

Blog on imechanica (NEW post)

Extreme thermal and electrical conductivity, blocks out almost all gases, stiff as diamond and stronger than anything else. The list of extreme properties of graphene seems never ending. The reviewed paper "Growth speed of single edge pre-crack in graphene sheet under tension", Jun Hua et al., Engineering Fracture Mechanics 182 (2017) 337–355, deals with the fracture mechanical properties of graphene. The huge ultimate load is 100 GPa or more. Considering this it is problematic that the fracture toughness is that of a ceramic, only a few MPam^(1/2). The consequences and suggestions are discussed in the blog. .

The blog is published here

ESIS TC2 chair election

Nominations are open for the chair and co-chair of ESIS TC2 (Micromechanisms). These should be sent by 31st January 2018 to Prof. T. J. Marrow (james.marrow@materials.ox.ac.uk), the secretary of the TC2 ESIS . Please cc all nominations to Jaroslav Pokluda (pokluda@fme.vutbr.cz, TC2 Chair) and Otmar Kolednik (otmar.kolednik@oeaw.ac.at,TC2 co-chair). Self-nominations are accepted. If you are nominating someone else, please ask them to confirm, by email, that they accept to be nominated. The vote will be held during February/March, and details will be circulated by email to TC2 members and will also be published in the ESIS newsletter and website. Please note that it is necessary to have a current ESIS membership to be eligible to vote or stand for election

TC8 Meeting

15-16 January, 2018
Paris, France
.

More info...

TC1 Meeting

12-13 April, 2018
Prague, Czech Republic
.

More info...

TC9 Meeting

10 - 11 May, 2018
Torino, Italy

More info...

TC15 Meeting - ESIAM 2019

4-6 September, 2019
Trondheim, Norway

More info...

Other Events

- March 14-16, 2018. XXXV Encuentro del Grupo Espanol de Fractura. Malaga, Spain. LINK.
- June 4 - 6, 2018. IGF Workshop. Fracture and Structural Integrity: ten years of "Frattura ed integrità Strutturale". Cassino, Italy. LINK.
- June 17-20, 2018, Theoretical, Applied and Experimental Mechanics (ICTAEM_1), Paphos, Cypro, Greece. LINK.
- July 1 - 5, 2018. 18th International Conference on Experimental Mechanics, ICEM 2018. LINK. Special issue "Fatigue and fracture of composite laminates and joints". LINK.
- July 2 - 6, 2018. 10th European Solid Mechanics Conference ESMC 2018, Bologna, Italy, LINK.
- July 5 - 6, 2018. 2nd International Conference on Materials Design and Applications, Porto, Portugal. LINK.
- July 8 - 11, 2018, 8th International Conference on Engineering Failure Analysis (ICEFAVIII), Budapest, Hungary. LINK.
- September 19-21, 2018. 6th International Conference on Crack Paths (CP 2018). Verona, Italy. NEW abstract submission deadline: 15.12.2017. LINK
- July 17-20, 2018. 18th International Confernece on New Trends in Fatigue and Fracture, Lisbon, Portugal, LINK.
- October 2-5. 2018, Dubrovnik, Croatia, ICSID 2018, 2nd International Conference on Structural Integrity and Durability, LINK
- June 24-26, 2019, ICMFF12, 12 International Conference on Multiaxial Fatigue and Fracture, Bordeaux, France, LINK.

- March 30 - April 3, 2020. VAL4, 4th International Conference on Material and Component Performance under Variable Amplitude Loading, Darmstad, Germany. First Announcement.

Procedia Structural Integrity

Journal website

Volume 7

Volume 7 is on line!
3rd International Symposium on Fatigue Design and Material Defects, FDMD 2017

Procedia Structural Integrity is an open access product focusing entirely on publishing full sets of conference proceedings, enabling fast, world-wide dissemination so that conference delegates can publish their papers in a dedicated online issue on ScienceDirect.

Volume 6

Certificate of publication

Commemorate the publication of your article with a FREE digital certificate of publication.

Get your certificate!

ESIS Technical Committees: NEW SERVICE

For each Technical Committee, a shared Google Drive folder will be activated. Filling the FORM and joining the TCs (one or more, it doesn't matter!), you will be able to share your publications (in the pre-print format), giving them more evidence, and you will be always updated about the papers published by the other TC members on the topics of your interest (and, obviously, about the TC activities).
ESIS-TC subscription form: LINK
How to share your papers in G Drive: LINK

ESIS: G Suite for all the ESIS members

ESIS has been approved for Google Apps for Nonprofits. The G Suite (basic version) has been activated for all the ESIS members (from 2016 onwards) and soon they will receive the credentials completely free of charge (the normal cost of this service is 50 USD per user/year).
Many new services are active in the G Suite (e.g., Classroom, that is really useful in the organization of Summer Schools) and other services are improved if compared to the "standard" Google services (e.g., Google Drive is 30 Gb instead of 15 Gb).
If you are a 2017 ESIS member and you did not receive the credentials, please, send us an email (esisweb.org@gmail.com).
Since 2017, G Suite credentials have being used as credentials for the ESIS website (please, activate these credentials in Google before using them in the ESIS website).

Be always update with ESIS events and activities!

- Facebook page: LINK
- Telegram channel: LINK
- Blog on imechanica: LINK
- ESIS Newsletters: LINK

Facebook Youtube Website Twitter