ESIS TC10 “ Environmentally Assisted Cracking”
Prof. Jesús Toribio,
|University of Salamanca,
Department of Materials Engineering,
E.P.S., Campus Viriato,
Avda Requejo 33 49022 Zamora, Spain
Contact E-mail: email@example.com
TC10 Subcommittee on
Prof. Hryhoriy M. Nykyforchyn
Contact E-mails: firstname.lastname@example.org
OBJECTIVES AND STRUCTURE
TC 10 was established in 1991 with the objective to merge research experience in the area of:
- fracture mechanics as a method of failure assessment, and
- environmental degradation of materials.
The Sub-committee on "Hydrogen Degradation", founded in 1995, is now chaired by Prof. Hryhoriy M. Nykyforchyn (email@example.com) and works in particular on:
- investigations of materials degradation under long term loading affected by temperature changes and by hydrogen/hydrogen sulphide containing media (gas and petroleum refining plants, offshore structures etc.),
- investigations of hydrogen degradation in metal welded joints under long term loading,
- methods for diagnosing hydrogen degradation in structural elements and for degradation prevention.
Workshop on Environmentally assisted cracking & hydrogen embrittlement
Venezia, Italy, 3-4 November 2014
Under the auspices of the ESIS TC-10 and organized by the Transport Technology Department of Maritime University of Szczecin, the Conference "Wear Processes 2012" will be held in Świnoujście, Poland, from 12 to 14 of September 2012.
The main topics of the Conference are as follows:
• Fundamental problems of deterioration and wear of materials.
• Simple and complex deterioration processes.
• Hydrogen degradation of materials.
• Wear processes accelerated by the hydrogen degradation and corrosion.
• Modeling of wear processes.
• Cases of abnormally rapid of wear.
Selected papers will be published in "Solid State Phenomena"
More details in http://wear2012.am.szczecin.pl/
J. Toribio H.M. Nykyforchyn
- 20 Years ESIS TC10 on Environmentally-Assisted Cracking - what was achieved, what remains to be done? (Dr. W. Dietzel, Helmholtz-Zentrum Geesthacht, Germany).
- State of a realization of the Agreement on Cooperation between the National Academy of Sciences of Ukraine (NASU) and ESIS and the activity of Ukrainian-Polish-German Summer Schools on Fracture Mechanics (Prof. H.M. Nykyforchyn, Karpenko Physico-Mechanical Institute of the NASU, Lviv).
- The future activities of ESIS TC10 “EAC" and of the Subcommittee on "Hydrogen Degradation" (Profs. J. Toribio and H.M. Nykyforchyn).
Group of participants at the TC10 meeting in Lviv
Prof. H.M. Nykyforchyn informed about the state of realization of the Agreement on Cooperation between the NASU and ESIS, which was signed in Kyiv on October 26, 2009 by the ESIS President (2006-2010), Prof. E. Gdoutos, and the NASU President, Prof. B.E. Paton. The Program of scientific and technical cooperation for the years 2009-2014 includes several items, the main is the organisation of Ukrainian-Greek Symposia on Fracture Mechanics of Materials and Structures (FMMS). The first such Symposium was organised in Xanthi, Greece, October 20-23, 2010, with a strong focus on hydrogen degradation from the Ukrainian side. Ten speakers from Ukraine participated in the Symposium where the Greek side covered the costs of accommodation and living for the Ukrainian colleagues. The 2nd FMMS was organized in Ukraine at the same conditions for the Greek participants.
Special attention was paid to the recently hold 12th Polish-Ukrainian-German Summer School (SS) on Fracture Mechanics, which was held from 18th to 23rd September, 2011, at Warsaw University of Technology, Poland) in conjunction with the Symposium “Mechanical Properties of Nanomaterials – Experiments and Modelling” of EMRS Fall Meeting 2011. This SS has ESIS status in Central and Eastern Europe following a decision of the ESIS Council on 12th September, 2002, in Cracow, Poland. 39 participants, including 21 from Poland, 14 from Ukraine, three from Austria and one from Germany were present. Further, the Symposium was open to the participants of the SS who presented recent achievements in deformation and fracture of nanomaterials. During the meeting it was tentatively agreed that the next, i.e. the 13th SS will be held in 2013 and will be hosted by the Wroclaw University of Technology, Poland. More information about the SS 2011 can be found in the note “The 12th Polish-Ukrainian-German summer school on fracture mechanics and strength of materials”, published in the Journal “Physicochemical Mechanics of Fracture”, 2011, no 5, pp. 130-132.
Prof. J. Toribio imparted to the participants of the Lviv meeting potential future activities of TC10. Main tasks for 2012 would be to organise one or more special session(s) on EAC during ECF19 in Kazan and for 2013 to organise a workshop on EAC problems. As possible places for this workshop, Porto Marghera/Venice, Italy, and Salamanca, Spain, were considered.
J. ToribioH. M. Nykyforchyn W. Dietzel
Activities of ESIS TC10, "Environmentally Assisted Cracking", and Subcommittee on "Hydrogen Degradation" in 2010TC10 was also strongly involved in the Workshop "Integrity of Pipelines Transporting Hydrocarbons" which was organized in the frame of NATO “Science for Peace” in Biskra, Algeria, April 26-29 2010.
For the 18th European Conference on Fracture, ECF18, which took place in Dresden, Germany, August 30–September 03, 2010, TC10 and its SC on "Hydrogen Degradation" organised a Symposium on "Environmentally Enhanced Effects" consisting (comprising) of six sessions and a total of 28 presentations. Also, a joint technical meeting of the TC and the SC was held in conjunction with this symposium.
The SC on "Hydrogen Degradation" further participated in the First Greek-Ukrainian Conference on Fracture Mechanics of Materials and Structure which was organised in Xanthi, Greece, October 20-23, 2010, with a strong focus on hydrogen degradation from the Ukrainian side.
At the ESIS Council Meeting held during ECF18 the long-time chairteam of TC10, Dr. Wolfgang Dietzel from GKSS Research Centre in Germany and Dr. Giovanna Gabetta from ENI in Italy, stepped down and handed over the chairmanship to Professor Jesús Toribio from the University of Salamanca in Spain.
Co-organising of the 12th Summer School on Fracture Mechanics, in Warsaw, September 2011
Co-organising of the Second Greek-Ukrainian Conference on Fracture Mechanics of Materials and Structure, in Lviv, October 2011.
- 4th International Conference "Fracture Mechanics of Materials and Structural Integrity", 23 -27 June 2009, Lviv, Ukraine, in combination with the
- 11th Polish-Ukrainian-German Summer School on Fracture Mechanics, 23 - 27 June 2009, in Lviv, Ukraine,
- 12th Quadrennial International Conference on Fracture, ICF12, July 12-17, 2009, in Ottawa, Canada - Conference "WEAR PROCESSES 2009", 19-20 November 2009 in Szczecin-Świnoujście, Poland.
Participate and support the activity of NetMed using the web address:
TC10 members are invited to take part in the group and to exchange information via the website.
TC10 UPDATE 2008
The 10th Polish-Ukrainian-German Summer School on Fracture Mechanics, “Fracture Mechanics and Strength of Materials in Hydrogen”, organized by the Wroclaw University of Technology, the Karpenko Physico-Mechanical Institute of National Academy of Sciences of Ukraine and the Technical University of Dresden, was held on 10-14 June 2007 in Trzebieszowice, Poland. The Summer School had about 70 participants, and the programme was elaborated in close collaboration with ESIS TC10, its SC on "Hydrogen Degradation", and ESIS TC13 "Education and Training". Following an ESIS Council decision made at ECF 14 in Cracow, these schools have obtained the status of ESIS Summer Schools in Central and Eastern Europe. For more information see Link "Minutes of the esis TC10 and TC13" under "TC10 UPDATE 2007" at the TC 10 web page.
For the 17th European Conference of Fracture, ECF17, TC 10 and its SC have organized in close collaboration with the Chairmen of this conference a special section of the ECF17 program. This section will comprise a session on "General Aspects of Environmentally Assisted Cracking" as well as one on "Hydrogen Degradation".
For October 2008, TC10 plans to organize a Workshop on “Corrosion/SCC Problems in Industry” in Porto Marghera (Venice), Italy. Special emphasis will be on “Case histories and their management”. In addition to the TC 10 members and all interested participants from ESIS member states corrosion experts from North Africa will be invited in order to foster an ESIS TC10 / Mediterranean Network on corrosion/EAC problems.
TC10 is further involved in the organization of the next International Conference on Fracture, ICF12, in Ottawa, Canada, in 2009. Together with other experts, special sessions will be organized comprising the topics of "Corrosion, Environmentally Assisted Cracking and Corrosion Fatigue" and of "Hydrogen Embrittlement".
TC10 UPDATE 2007
For the 16th European Conference of Fracture, ECF16, the TC and its SC jointly organized a Special Symposium on Environment Assisted Fracture. The aim of this symposium was to bring together researchers involved in experimental and theoretical investigations of this failure phenomenon and to present talks that would address the state-of-the-art in the current understanding of corrosion and corrosion assisted cracking. The symposium comprised a full day session involving 18 contributions, and successfully fostered discussions on all aspects of environmentally assisted damage, degradation, and rupture processes. More contributions related to environmentally assisted cracking (EAC) problems were presented in a separate Track and in some of the Special Sessions.
In December, Dr. Giovanna Gabetta, co-chair of ESIS TC 10, took part in the 25th Annual Conference “Corrosion Problems in Industry”, the silver Jubilee of Egyptian Corrosion Society (ECS), in Palmera Hotel, El Soukhna, Egypt. The conference saw a significant number of presentations in the field of corrosion, including presentations dealing with EAC problems, like failure analysis, SCC testing, and integrity of pipelines. On the occasion of this conference, it was discussed to start a cooperation network between ESIS TC 10 and the Egyptian Corrosion Society, which could be a bridge toward the corrosion experts in the North African area. As a first step, an ad-hoc group was established (participants: Layla A.Al-Juhaiman, Rabab M.El-Sherif, Giovanna Gabetta) with the aim of collecting case histories for a data base.
2. Future actions
TC10 is now planning to organize a meeting on “Knowledge management for EAC problems” with potential emphasis on “Case histories and their management”. For this meeting, which is likely to be held in Fall 2007 in Italy, participants from the Mediterranean area will be invited in addition to the TC 10 members, so that it is likely to become the first meeting of a future ESIS TC10 / Mediterranean Network on corrosion/EAC problems.
TC10 UPDATE 2006
No formal meetings of the TC were held in 2005. However, the TC10 has been involved in a number of activities:
- The successful submission of a proposal for a new research project to the Science and Technology Centre of the Ukraine (STCU) which had been prepared by the Institute of Applied Problems of Mathematics and Mechanics (IAPMM) and the Karpenko Physico-Mechanical Institute (KPMI), both of the National Academy of Sciences of the Ukraine. The project entitled "Monitoring, Technical Diagnostics and Remaining Life Prediction for the Oil Transit Systems" is related to the long-term service of oil and gas pipelines and will address the problems arising from a loss of workability, the existence of cracks, and the degradation of the mechanical properties of the steels used for these pipeline systems.
The project includes the development and application of appropriate technical monitoring and diagnostics tools to assess the technical state of pipelines and other oil transportation equipment by detecting corrosion-mechanical damages at an early stage, and evaluating possible changes in the mechanical properties of the materials involved which lead to material degradation. It will also comprise the development of suitable methods for the prediction of residual lifetimes of oil transportation systems and the establishment of new criteria for the workability of pipelines and related equipment, and their application to existing structures. As an additional outcome of the project, appropriate modifications to existing normative documents pertaining to the strength, durability, and reliability analysis of existing pipeline systems for oil transportation are expected.
The project is closely linked to the objectives of ESIS TC 10 and will hence be actively supported by members of the TC.
- According to the strategy discussed at the last TC10 Workshop (October 2004) on "EAC in High Strength (Pipeline) Steels", the TC has established links to the European Pressure Research Group, EPRG, on the occasion of a Research Fund Coal and Steel (RFCS/ECSC) dissemination forum on "X100 Steel Pipe for High Pressure Gas Transportation" held at the Salzgitter Mannesmann Forschung in Duisburg in April 2005.
CALENDAR 2006 At the 16th European Conference of Fracture, ECF16, to be held on July 3-7, 2006, in Alexandroupolis, Greece, TC10 has organised a Special Symposium on Environment Assisted Fracture. The symposium will have about 20 presentations and is scheduled for Tuesday, 4 July; Linked to this symposium, a technical meeting of TC10 will be held.
Prof. Nykyforchyn celebrated his 60th birthday. The ESIS TC10 wants to honour him with the following poster:
TC10 UPDATE 2005
TC10 had no meeting in 2003. TC chair has contributed to the organisation of the following conferences:
3RD International Conference Fracture Mechanics of Materials and Structural Integrity
22-26 June 2004,
Second International Conference on Environment-Induced Cracking of Metals EICM-2
19 - 23 September 2004
The Banff Centre,
Banff, Alberta, Canada